Primary Purpose of Job:

The primary purpose of the job is to assist the Workshop Supervisor to carry out various

workshop duties in support of drilling operations and to supervise the Technician I field work

related to servicing of wellheads, replacing valves, re- orienting x- mass trees and construction

of burn lines; and/or assist UDN/2 team with site preparation activities..

Principle / Key Responsibilities:

1. Supervise the Technician I field work related to servicing of wellheads and X- mass trees

for the wells in the custody of the Drilling Department and ensure that QHSE issues are

addressed within all relevant activities.

2. Investigate and trouble shoot any integrity problem related to the wellhead and X- mass

tree valves or site preparation. Arrange for pressure testing the same in accordance to

procedures.

3. Supervise the replacement of valves, re- orientation of the X- mass trees with the

assistance of the Technician I. Ensure that the well is secure and down hole plugs are

installed by the wire line group prior to carrying out the work.

4. Supervise the construction of burn lines that are required for carrying out the “rig- less”

operations. Ensure that the loading, offloading, transporting and constructing of the burn

line is conducted in a safe manner.

5. Coordinate with and assist the General Foreman for scheduling the work related to the

maintenance of automatic hydraulic pumps, pressure testing of wellhead, x- mass tree,

cleaning and repairing of 3K and 10Kpsi choke manifold equipment, providing routine

maintenance of all equipment and tools such as gauges, air compressors, hydraulic

units, etc.

6. Coordinate with the General Foreman for the scheduling of work activities in the

workshop and well site, including the overseeing the laying of burn lines, maintenance

& greasing of wellheads valves during rig and “rig- less” operations while the well is in

the custody of the Drilling and Completions Department.

7. Initiate purchase orders and “Material Reservations” for Drilling Workshop requirements

using SAP and Materials Call off Orders. Ensure the materials required for drilling

operations are in accordance with specified quantities and specification and are loaded

from materials stores in a safe manner. Ensure all documentation is properly made and

recorded. Initiate “Contract Work Orders” for fabrications, threading of tubular

crossovers, pup joints, etc. including receiving instruction for the work orders from

Workshop Supervisor with specification and drawings as necessary. Ensure the

necessary approval is obtained and coordinate with contractor until items are received

in Drilling Workshop.

8. Coordinate with General Foreman to ensure that Technician I are trained for safe

handling of equipment, safety practices and procedures related to the workshop and well

site works are followed and that pre- job safety meetings are conducted for all critical

operations.

9. Coordinate with the General Foreman for maintaining and updating the stock records for

a wide variety of drilling tools/equipment in the custody of the workshop i.e. wellheads,

tubular, drilling bits, liner hanger, etc.

10. As required, assist UDN/2 with site preparation work, including surveying new locations

as per the set criteria, endorsing PTW daily, and following up with site preparation civil

work, drilling conductor, and water wells.

Decision Making Authority:

 Works under supervision of the Workshop Supervisor or Senior Workshop Supervisor

or Drilling superintendent and in accordance with established procedures Drilling

Reference Manual and workshop practices.

 Authority to check and inspect the work assigned to Technician I and General Foremen.

 Work in progress and completed is regularly checked by the Workshop Supervisor

and/or Operations Engineer.

Context / Special Features / Challenges:

 Walking / standing about 75% of working time at the workshop and well site. May

occasionally carry heavy items when delivering tools and materials.

 An additional challenge for the position is to ensure that stock records are properly

maintained for a variety of spares and consumable items used for wellhead maintenance

and drilling activities.

 A key feature of the job is to ensure observance of safety practices by subordinates

including wearing of safety clothing.

 Exposed to dirt, heat, noise, oil, water, and grease depending on work locations and to

prevailing climatic conditions during of 70% of work time

Qualifications & Experience:

 Completion of secondary (12 years) education, followed by 2 years training with the

ability of reading, writing and understanding the well sketches and manuals.

 Good knowledge of both spoken and written English.

 At least 3 years experience of handling tools and equipment related to work.

 Qatari Driving license

To proceed, kindly send us your comprehensive CV along with your educational certificates. You can conveniently WhatsApp your documents to +

Address:Doha, Qatar Al Rayyan Plaza, Third Floor, Office 306
About Employer:
Contracting836@gmail.com